Approach Tech DVR-3704T Uživatelský manuál Strana 1

Before trying to connect or operate this product, please read this manual completelyINSTALLATION &OPERATION MANUALDigital Video RecorderDVR-3704T

18 █ (Stop) button: Press to stop playing back a recorded video from a hard disk and the LED will emit green light. 19 button: Press to start reco

2.2 REAR VIEW 1 DC jack: The inlet connects to an external power supply. Connect with the 12 V DC TUV-approved Power Supply; or connect wi

2.3 ALARM In/Out ALARM1 IN ALARM4 INALARM2 IN ALARM3 INALARM OUTRECORD IN GROUNDDISK FULLALARM RESET123456789 THE ABOVE FIGURE IS A REAR VIEW. 1. GN

3. BASIC OPERATIONS This section shows you how to operate and manage the DVR. 3.1 RECORDING OPERATIONS 3.1.1 Manual Recording When the DVR is

3.1.3 Timer Recording Timer recording provides seven schedules in a weekly table. This way the DVR will start and stop recording according to the pro

3.2 PLAYBACK OPERATIONS This section shows you how to operate the fast and single-picture playback functions, and details how the unit is to playback

3.3 BACKUP OPERATIONS Archive Single image Clips into a USB device: Please take the following steps to archive a critical image in a USB device. (1)

3.4 KEY LOCK OPERATIONS  To activate the key lock function: Press the “v” button for at least 3 seconds to activate the key lock function. The devi

4. SEARCH MODE This section shows you how to access recorded video. 4.1 RECORD LIST Take the following steps to proceed with the record-list search

SEARCH 1.RECORD LIST ENTER 2.ALARM LIST ENTER 3.TIME FILTER ENTER ALARM LIST HDD:HDD1 0001/0120 START TIME EVENT CH 08/15/2006 09:0

5. MENU MODE There are 7 functional items for setting operations in the setup menu system as shown below. The following sections will instruct you st

5.1 QUICK SETTING This page enables you to rapidly install your desired setting. For more detailed changes, enter each item page. MAIN M

5.2 DISPLAY OPTION This item enables you to fix the display labels on your screen. DISPLAY OPTIONMAIN MENU 1.TIME SETTING 09:51:02 1.QUIC

5.3 SEQUENCE SETTING This page enables you to set the dwell time for displays in each channel and the 4-windows ( ) mode at your own preference anywhe

5.5 ADVANCED SETTING This page includes multiple special functions. MAIN MENU ADVANCED SETTING 1 QUICK SETTING ENTER 1.RECORD SETTING ENTER 2

5. AUDIO: This item has 2 options: "ON" and "OFF" (disable). Note: When the recording rate is set under 5 F/S (the lower recording

5.5.3 MOTION SETTING Here you can set the motion detection area of each channel. MOTION SETTINGADVANCED SETTING 1. SENSITIVITY MOTION CHE

The user needs to see the situation in each channel in order to set a detection zone within the 8W×6H (48) area. The effective points are marked “

NOTE: When connecting to a network, each connected DVR must be assigned a unique IP, which must be in the same class type as your network address. IP

5.6 DISK SETUP Enter the disk setup mode to select your desired setting. DISK SETUP 1.HDD REFORMAT ENTER USB DEVICE INFO: USB TOTAL SIZE

SAFETY PRECAUTIONS All the following safety and operation instructions for the prevention of harm or damage to the operator or other persons should b

5.7 SYSTEM SETTING Enter the system setting mode to select your desired setting. PROGRAM FLASH: SUCCESSPRESS POWER KEY TO RESTART MAIN ME

6. DISPLAY MODE You can display the HDD information as shown on Figure 6A below at any time by pressing the Display button. The unit displays status

7. NETWORK VIEWER: INTRODUCTION Please use our Network Viewer to connect the DVR. It supports your local PC simultaneously with the DVR backup data.

Point to the Local Area Connection and press the right mouse button. Click Properties to enter the Local Area Connection. 3. Click the Config

5. TCP/IP Configuration setting  Click Start  Control Panel  Network.Connections  Local Area Connection  Select Internet Protocol (TCP/IP), and

7.2 CONNECTION TESTING As with the previous settings, follow the instructions below to ensure you have established the connection successfully. 1. C

7.3 SOFTWARE INSTALLATION Step 1: Exit all applications currently running in the selected PC. Step 2: Insert the supported PC in the CD-ROM device.

Step 4: The installation screen will show the message "Network viewer". Or you can enter the folder name you want. Note: Click "Next&q

Step 6: Confirm the installation details. Note: Click "Install" to continue the installation. Step 7: The window below tells you the proces

7.4 VIEW THE DVR VIDEO FROM A REMOTE PC Follow the instructions below to use the Network Viewer software to browse the DVR-3074 video from a remote lo

Table Of Contents 1. PRODUCT FEATURES ... 4 1.1 PRODUC

Step 4: Press the button to enter the Network Viewer Setting window which is shown below. Step 5: Please type or select the IP address which is se

7.5 OPERATION 1. Connect to a DVR: Press the button to enter the Network Viewer Setting window. Select the IP address from the drop-down list w

Set the working environment: (1) Type a new IP address. The Network Viewer can memorize 25 IP addresses of DVRs. Press the button to delete the IP

Pop-menu: You can use the mouse to move to each channel. Click the right key of the mouse to show a window. You can select Save "CamNo XX" I

8. SPECIFICATIONS Model DVR-3704T Image System NTSC PAL 720x240 pixels 720x288 pixels Video Resolution 360x240 pixels 360x288 pixels Operation Mod

APPENDIX 1. – Insert the mobile rack To add the second hard disk into the DVR, the user has to insert the mobile rack first. To install the mobile ra

APPENDIX 2. – RS-232 Connection CONNECTION The transmission protocol is 8 data bit: 1 start bit, 1 stop bit and no parity. Five different speeds c

45APPENDIX 3. – Compatible SATA hard-disk drives The compatible hard-disk drives, which can be used with the unit, are shown in the tables below. Man

...26 5.5.5 SCHEDULE SET

1. PRODUCT FEATURES 1.1 PRODUCT INTRODUCTION The DVR-3704 is a unique low-cost, high-performance digital video recorder supporting a 4-channel

 Easy field firmware update via USB device can be performed by the end user.  Built-in USB connector to save image(s) for an individual channel to a

2. DESCRIPTION OF THE FRONT/REAR VIEW 2.1 FRONT VIEW 4CH DIGITAL VIDEO RECORDER 1 < button: Press to move the focus to desired items

8 button: Press to double the size of an image. Use the "^" ( up ), "V" ( down ) , "<" ( left ) and ">&quo